Link to FurtherEmissionsReduction2024 >

Day Night Electricity

1. Measurements

• Gauging the benefit and ideal size of a battery is complex.
• One measure is the number of days when the day time export exceeds the night time consumption, so that the tomorrow morning charge in the battery exceeds this morning's charge.

• To gauge this, DavidMorgan downloaded the data for the church from United Energy. In this file B1 is export and E1 is import. We do not have any other monitoring of our panels. In particular, we have no measure of total daytime consumption, the sum of import and self consumption.

• The kWh in each 5min interval were summed for 6am to 6pm (Day) and 6pm to 6am (Night). As expected the night time export was zero except for small numbers during early morning in mid summer. Night time import therefore equals night time consumption.
• Day time export in green. Night time import and hence consumption in red, against the day in the year measured, ie March 2023 to March 2024

  • 

• Daytime export versus night time consumption. On days above the 45 degree line, the exports diverted to a battery would cover the night time consumption. Not surprisingly, days of high daytime export tend to have low nightime inport.
• A battery of 30kWh capacity would cover 61% of those nights. That is on 61% of days, the export was enough to fully charge the battery and the battery would be large enough to supply the evening load.
• A 20kWh battery would be fully discharged virtually every night, but only fully charged on 78% of days.
• Estimated saving would be about 61% x 365days/year x 25kWh/day x 27c/kWh, or $1500/yr for a 30kWh battery. Some extra savings would occur on intermittently sunny days, when the battery could supply energy during cloudy spells.

  • 

• The minimum overnight consumption of almost 20kWh surprised me, but it is consistent with the United Energy data for last January, which shows an average daily import of 36kWh, the sum of day and night, when most of the day time load would be met by solar and evening activities were few. Note that "Energy used" is actually energy bought.

  • 

• For comparison, the Morgan household uses about 1.5kWh overnight when we are away, and a minimum of about 2.5kWh when we are home.

2. What accounts for the night time consumption?

2.1. Boiling water unit (Urnie)

• Monitoring device fitted by DavidMorgan 30 March 2024.

• It shows 260W apparently continuous background consumption.
• When re-heating after water is taken, this rises to 2.4kW. This also presumably happens intermittently if the standby element does not maintain temperature.

• This web page and this one and this one suggest that 10W is normal, without giving a source. This one suggests 2.5W standby. There is a lot of confusion and misinformation on the web.

• I have not found any supplier that quotes standby energy consumption of their products.
  • Persistent questioning of Zip produced: "Unfortunately, we don't have stats on the standby power."
• Consumption from 7pm Easter Saturday to 7am Easter day was recorded as 2.8kWh. Next night was 3.21kWh. Monday night was 3.28kWh. These are all overnights with no evening use.
• 3kWh is enough to bring 33 litres of water from room temperature to the boil. (0.09kWh/litre)

• Put on timer from April 12. Off between 11pm and 8am. Saving 1.5 to 2kWh per day
  

2.2. Refrigerator

• Barrie's guess is 100W average. Morgan home fridge is 0.47kWh/day or 20W average.
• Monitor fitted 16 April.
  • First 24 hour consumption of 2.09kWh, or 87W average.

2.3. Freezer

• Barrie's guess is 100W average. Morgan home freezer is 0.26kWh/dayor 10W average.
• Monitor fitted 16 April.
  • First 24 hour consumption of 0.88kWh, or 37W average.

2.4. Hot water system

• No easy way to directly monitor as wired in.
• Probably responsible for the blips in the overnight record. Note that "Energy flow" is kWh in half hour intervals, not hours.

  • 

• These appear to be about 0.8kWh twice per night, or 1.5kWh overnight.

2.5. Office copier on standby

2.6. Two TV screens in the foyer

• Comparable units are 100W each.
• The slide shows do not automatically resume after a power outage.

2.7. Security camera system

2.8. Security lighting

• Back passage is LED.
• Car park lights are LED, 3 by 60W motion activated.
• Front flood lights are LED, 2 by 80W

2.9. Solar panel inverters.

• Comparison of currently available inverters suggests less than 5W. Three boxes with 3 phase output implies 9 inverters, and older one may draw more.

2.10. Summing so far